Product Categories

Contact Us

Shenzhen Powstar Technology Limited
(Headquarters)Jiujiutongxin Industrial Park, Tongle Town, Longgang District, Shenzhen, China


Home > News > Content
Die Casting Process
Nov 11, 2016

Traditional die casting process consists of four steps, or referred to as high pressure die casting. The four steps include die preparation, filling, injection and sand, which is a modified version of die casting process based. In the process of preparing spray lubricant into the mold cavity can also be, in addition also can help control the temperature of die lubricants can help casting mold. Then you can close the mold with high pressure within the molten metal into the mold, the pressure range between approximately 10 to 175 MPA. When the molten metal is filled, and the pressure will be maintained until the casting solidification. Then push rod will launch all the castings, because there may be multiple cavities within a mold, so every time the casting process can have more than one casting.